Upgrade to Wheezy

From Roaring Penguin
Revision as of 15:14, 28 November 2017 by JohnMertz (talk | contribs) (Upgrade Debian Squeeze to Wheezy)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Note

Debian upgrades must be performed one version change at a time. If you don't know which version you are on, or which version is next, you can find more information on Debian Upgrades.

This upgrade should only be performed if you installed from, or already ran the Upgrade to Squeeze (Debian 6).

Upgrade Debian Squeeze to Wheezy

Since Wheezy (7.0) will uninstall Postgres 8.3 you need to upgrade the database first, see Database Update 9.0.

  1. Make sure your existing CanIt installation is up-to-date:
    upgrade-canit-appliance
  2. Now upgrade the OS to Wheezy:
    upgrade-canit-appliance wheezy
    Then you'll see messages scroll by, as the machine downloads, unpacks, and re-starts assorted services. (This all only delays mail during the re-start phase).
  3. Since Debian has changed the way it distributes firmware, you may need additional packages. Even if you don't need them, installing them won't hurt so we recommend running:
    apt-get install firmware-linux-free firmware-linux-nonfree firmware-bnx2 firmware-bnx2x
    That's all one long line in case it got line-wrapped by a mail reader. Also, the term "non-free" refers to Debian's policy on separating proprietary code from free software. There is no financial cost associated with the "non-free" firmware.
    If, after running this command, you still receive warnings about "Possible missing firmware", please reply with the exact error message. You can check for unusual modules by perusing the output of lsmod.
  4. Reboot the machine.
    reboot
    To check if mail is flowing use the following:
    tail -f /var/log/mail-daily/current.log or wherever they are to see if working

NOTE: The above commands are for a single machine. If you are upgrading a cluster, then you should run each on all machines before moving onto the next step, starting with the DataBase machine. Also modify the steps as follows:

For steps 1:

  1. First download the packages before installing them to minimize downtime by running the command with the following flag after it:
    --download-only
    eg:
    upgrade-canit-appliance --download-only
  2. Stop CanIt on all cluster members:
    /etc/init.d/canit-system stop-gracefully
  3. Run the actual command listed for that step above.
  4. After the command above, run:
    /etc/init.d/canit-system start

Repeat for step 2 and 3.

Then run steps 4.

Upgrade to Jessie

Wheezy is now also out of date. There is another wiki discussing the Upgrade to Jessie. The upgrade to Wheezy MUST be done before you can upgrade to Jessie!

Wheezy will still receive security updates from Debian until May 2018 and will get new CanIt packages for years after that. You are under no immediate need to upgrade at this time, however some bugs do exist in Wheezy which have been addressed in Jessie, so it would be wise to upgrade when it is convenient.