Common CanIt User Tasks
- Main article: Quick Start Guide
The following are suggestions on how to perform frequent tasks applicable to a CanIt end-user.
- 1 Please Note
- 2 Manage Your Quarantine
- 3 See Why a Message Was Trapped
- 4 Stop Good Messages From Being Trapped/Let Through
- 5 Blacklisting and Whitelisting
- 6 Create Custom Rules
The options within this guide may or not apply to you, depending on your version of CanIt and how it has been set up by the e-mail administrator. If you can't find something as described but think that you need it, consult your administrator; there may be a reason that you don't have it
Manage Your Quarantine
Quarantined messages can be accepted, rejected or optionally marked as a phishing attempt. When you perform these actions, the message is trained into our Bayes Database for content analysis which makes the scanner better at identifying spam in the future. You will also generally be allowed to whitelist or blacklist the Sender, Domain, or Network. When a message is whitelisted, it is automatically accepted and when it is blacklisted it is automatically be rejected. This can be done in multiple locations.
From the Inbox
If you are set up to receive notification emails it will contain voting links beside each entry. You may or may not have all of the above options available. By clicking the voting link for each item the changes should automatically be applied. This may require you to log in to the WebUI to register the vote.
From the WebUI
The pending messages in your quarantine will be immediately visible from the Home page as well as being categorized and searchable in the Quarantine Category. The messages visible on the Home page are messages that were deemed to be suspicious, but not egregiously so and are pulled from the more detailed Quarantine->Pending. You can also select one of the other pages from the list in the Quarantine category to see messages that you have already dealt with.
From either of these pages you can quickly accept or reject any of the trapped messages with the drop-down list for each item. You will need to click Submit Changes, when you have specified all of your desired actions. You may additionally have the ability to Always Accept, or Always Reject from the sender, however, this should be used sparingly.
See Why a Message Was Trapped
From your quarantine you can click on the time that the message arrived to view the incident details. This is also accessible while viewing the message via the subject link by pressing "See Incident Details" at the top of the page.
At the bottom of the incident page is a list of all of the rules that were triggered by the message. The most common reason a message is blocked will be if it triggered the Bayes statistical analysis check as shown at the very bottom of this section after a list of suspicious words and phrases that it found. The other scores are shown as:
- RULE_NAME Human-readable description of rule
Any of the scores that are assigned for specific rules are configurable by your administrator if you think one is consistently causing trouble, however they are set up by default to work optimally for 99% of users.
Stop Good Messages From Being Trapped/Let Through
We at Roaring Penguin run what we call the Roaring Penguin Training Network (RPTN). This is a massive database consisting of all of combined judgement of all of our participating members. By participating your CanIt system will benefits from the judgement of millions of votes, creating a very accurate set of general rules on what the content of spam emails look like. That being said, your organization receives a unique sub-set of all of the mail on the internet and so rules that fit the rest of the world may not fit you exactly. This is why it is important that you still train your own system, even though it has so much inherited knowledge. Your votes will override the RPTN votes if they differ allowing you to have a filter that is customized to your needs.
Any time that you release a message from your quarantine, this is done automatically; teaching the system that messages which resemble the one you released are good. Likewise, if you reject a pending message it will reinforce the assumptions that the scanner made about its content and will make similar messages score even higher in the future.
If a spam has already made it to your inbox without being trapped, you will likely have the ability to vote it as spam from the CanIt footer that is generally added to the content of the email itself.
If you find that you consistently have the same types of good messages trapped or bad messages let through over an extended period, a special rule may be in order.
Rules can be created under the Rules category which may or may not be available to you as a user. For more on this, see Blacklisting and Whitlisting, as well as Create a Custom Rule below.
Blacklisting and Whitelisting
Blacklist and whitelist entries can be requested from the either your inbox or the WebUI in the same manner that you accept or reject mail. Please note that depending on the configuration of your system and its current load, these rules will take some time to be applied. If they don't seem to be working, wait a few hours before contacting your administrator.
Blacklists and whitelists are absolute rules. Messages that trigger either of these will not go through any scanning. They will either be automatically discarded in the prior case or automatically rejected in the latter. As such you need to be careful with them.
Blacklisting is often not as useful as you might initially think. Spammers tend to generate new sender addresses for every message they send, and so you will rarely receive two spams from the same sender. Blacklists are most appropriate for things like recurring newsletters and ads from e-retailers or other similar senders who's unsubscribe process is too tedious.
You should also use some caution when creating whitelists as well. Domain whitelisting is rarely advisable, especially for common domains like gmail.com or hotmail.com. Even for senders, however, there is a level of danger to whitelists because spammers are capable of spoofing their address as one of your common contacts, or causing one of these contacts to perpetuate their spam attack. If either of these is the case for a contact that you have whitelisted the spam will make it through unchecked.
If you are worried about adding absolute rules like these, see Creating a Custom Rule below.
From the Inbox
If you receive a spam in your inbox you can select one of the blacklist voting links in the footer. These voting links will also be available in your quarantine notifications if you are set up to receive them.
Because blacklisting is often useless, as described above, a blacklist entry generated in this manor is automatically given a 30 day expiry. If you would like to make a permanent blacklist you can do so in the WebUI or request one from your administrator.
From the WebUI
These can be made in a very similar manor to the inbox by selecting Always Accept or Always Reject from the Home page or Quarantine->Pending. Blacklists created in this manor are also temporary when created in this way.
Manual blacklisting and whitelisting rules can be created under Rules->Sender, Rules->Domains, and Rules->Networks for the relevant level of scope. You create a rule by entering the address into the text field at the toy and clicking Add Rule. Once it is in the list you can specify what to do for that address, when the rule should expire, if ever, and a brief description of why you created the rule. If there are existing rules that you would like to change, that can also be done here. Rules with generated from the inbox or quarantine will have a comment with the IncidentID automatically added to the comments. Once all of the changes are made to your liking, make sure that you click the Submit Changes button at the bottom.
Create Custom Rules
This is something that you may want to - or need to - request from your administrator. Custom rules are able to be specified in Rules->Custom Rules or Rules->Compound Rules. Compound Rules are a more complex version of custom rules that allow for the use of logic operators such as AND and OR. This allows you to make rules only apply when multiple fields are matched. If you don't know how logic operator work, ask your administrator for help.
A custom rule is quite simple and can be made to look at a variety of fields such as the sender address, sender domain, subject, or otherwise to varying levels of specificity. You can then select a value to apply to any message that matches this definition. By selecting a positive value, messages that trip the rule will have their score increased by that amount. It is generally advisable that you don't set a broad rule to apply as much as your S-300 value (Preferences->Quarantine Settings->Filter Settings->S-300). This makes it so that a message must still score on at least one other rule before it is quarantined, minimizing the incidence of false-positives. Similarly, applying a negative value will lower the total spam score, making matching messages less likely to get trapped. Again, you don't want to apply too large of a negative score for a broad rule otherwise you risk having spam get through because it tripped the rule. For very specific rules that a apply to messages you never want to see, or always want to see, you can go much higher or create a backlist/whitelist as explained above. See Where Does it All Go? above to help you find the right value for your desired result.
Country rules can be set in Rules->Countries and they allow you to apply scores in the same way as custom rules specifically to messages originating from a country. It is important to note that these decisions are made based on server locations, not top-level-domains. Mail is often relayed through countries other than those that they originate from and so your points may end up being applied or missed where you might not expect.
Rules->MIME Types allows you to create rules for the files that are included as attachments based on their extensions. CanIt will detect not only the immediate file extensions, but also those within certain archives such as .zip. Virus transmission is extremely common with many Microsoft file formats such as .exe, .msi, and .bat. These are all blocked by default and while it is highly advisable that you don't change this, you can apply a rule to allow or at least hold them if you need to. It is much more advisable that you use a file sharing service such as Dropbox and run thorough scans of the files if you need to send or receive them. If you try to send many file extensions to major services like Gmail, they will be rejected on the receiving end anyways.
Additionally, other formats such as Microsoft Office documents are common carriers of viruses. These are not generally enforced by default, but if your company doesn't deal with these files very often, they may be for you. You can add your own by entering the extension without the dot in the text field at the top, clicking Add Rule, then applying an action for whitelisted sender and a general action for all other sender. Be sure to Submit Changes when you are done. As a final note, you can append > to the file extension to have the rule only take effect if it is contained within an archive.
- Continue to: Common CanIt User Problems